3D Printing Stack Exchange
3D Printing Stack Exchange

Most Popular

more tags
1500 questions
4
votes
1 answer

Print slipped away

I try to configure my 3D Printer properly. I printed this boat model https://www.thingiverse.com/thing:2763854 (with a scaling of 0.6):The quality of the print looks nice but at the last roof the entire print slipped away. (e.g. no adhesion between…
james
  • 43
  • 4
4
votes
2 answers

Ramps 1.4 with a power brick

I'm currently designing a RepRap 3D printer that will not have a heated bed. I have heard that it is possible to use a power brick with commercial printers lacking heatbeds. Is this possible with a RepRap printer using a RAMPS board? I'm referring…
TECTEC3 Studios
  • 416
  • 2
  • 6
4
votes
2 answers

Threads for nozzle (Anet A6 extruder)

How do I know what nozzle to get for my Anet A6 printer? I want to get some hardened nozzles because I would love to print with some glow in the dark filament, but I know that eats up brass nozzles fast. But there is so many thread differences so I…
Ljk2000
  • 1,233
  • 2
  • 10
  • 21
4
votes
1 answer

How to connect a NEMA 17 stepper to RAMPS 1.4?

I have an NEMA 17 stepper motor 17HS4401 and a RAMPS 1.4 driver unit. The motor pinouts are: RED A+ BLUE A- GREEN B+ BLACK B- while the RAMPS board has the following: 2B 2A 1A 1B Could someone point me in the right direction? How can I connect…
OrElse
  • 305
  • 3
  • 9
4
votes
3 answers

Prusa i3 MK2 doesn't accept the printing material

We have a Prusa i3 MK2 and we've changed for a print with another colour material but when I pressed "load filament", it didn't make anything. Often after five times doing that the printer works. I don't have any pictures but the filament is in the…
Nobodie
  • 65
  • 2
4
votes
3 answers

Why the Anet A6 can't do .05 layer height

So like I sayed in the title, Why can't the Anet A6 do .05 layer height? I found that some printers can do .05 layer heights, but the Anet A6 can't? I am interested to know if it is the stepper motors or the threaded rods or something. Maybe this is…
Ljk2000
  • 1,233
  • 2
  • 10
  • 21
4
votes
1 answer

MOSFET as a safety feature

When going through printer reviews, I often see the presence of a MOSFET listed as an important safety feature. I understand the MOSFET to be a transistor, but I haven't understood how it is used in the circuitry of a printer, and - above all - why…
mac
  • 4,687
  • 1
  • 13
  • 35
4
votes
2 answers

Any code to move up Z axis after finishing the printing?

Is the firts time that I saw this movement after the printing has finishig and causes the nozzle crashes to the printed part and I noticed due the part is 14x8 and the nozzle is to near and below to the border of the shape. I supposed that some…
Fernando Baltazar
  • 1,500
  • 3
  • 15
  • 21
4
votes
1 answer

Has anyone encountered this type of strange print patterns?

I am noticing strange print patterns ever since I upgraded to the Prusa multi material print head. The patterns are consistent printing upwards but inconsistent amongst each face. I am using original Prusa PLA filament, and have tried to…
user9868
  • 41
  • 2
4
votes
2 answers

Raft warping (Makerbot Replicator+)

Quick thing: Please tell me if I misuse any of the terminology On a replicator+, I have been printing successfully for a while, when suddenly the raft started to warp. I was doing a bunch of models that covered the whole tray, so I shrunk to just a…
Jake Faulkner
  • 43
  • 1
  • 6
4
votes
3 answers

The bottom of the printed objects has waves after replacing the nozzle

I had a problem with my nozzle on my homemade printer. The problem was that the nozzle with a 0.4 mm diameter wasn't putting out any plastic. I replaced the nozzle with a 0.2 mm one and now the bottom of my model is looking like this: I tried to…
Coder_fox
  • 188
  • 6
4
votes
2 answers

Is it advisable to use additional external fan(s) for printing PLA?

I was wondering if adding (an) extra fan(s) (not connected to the printer, but blowing on the print area) could improve the quality of PLA based prints(printing at 210 C). The printer already has a built in fan with a fan shroud that directs air to…
zack1544
  • 143
  • 1
  • 5
4
votes
1 answer

.stl file is "not ready for printing"

I have this .stl file and I sent it to a company for printing, they claimed that the file is not ready for printing and is charging me more money for them to fix the error. What can I do to make the file "ready for printing"
Janjan
  • 41
  • 1
4
votes
3 answers

Anet A8 hard to insert filament

I had been printing with ABS and took the advice to alter the fan so I can see the filament when I am loading it into the cold end. It was tricky but doable. I am now trying with PLA and getting it to line up with the whole is a nightmare. Can the…
Plodmore
  • 367
  • 5
  • 13
4
votes
1 answer

Wrong temperature on extruder 2

Firstly, I just bought a G2S mini pro from Geeetech and it is my first 3D printer (therefore I'm 100% newbie in this area). The first extruder seems to be ok, the temperature varies from 23°C to 201°C and if you touch it you can see that it is hot.…
Hola Soy Edu Feliz Navidad
  • 230
  • 2
  • 8
1 2 3
…
99 100