Access denied when Uploading

Question

I went to upload my sketch to my Uno (r3), but unusually, the Upload Console returned this error:

avrdude: ser_open(): can't open device "\\.\COM4": Access is denied.

Just started seeing this, cannot upload.

I had Ultimaker Cura open, this seemed to be hogging the com ports. Make sure your other apps aren't using them. — aaa, Dec 29 '19 at 23:51
I can confirm here that for me it was also Ultimaker Cura. Once closed, COM port was free again. I think it's worth a try, if all the other things look ok (i.e. checking the device manager). — marco, May 02 '21 at 02:23

score 6 · Answer 1 · answered Jul 06 '16 at 14:20

6

There might be another device has already connected to that port. It could even be a terminal emulator which is left connected from last debugging session.

Otherwise, make sure that your UNO is really presented on COM4 by checking with "Device Manager". if not, change the port where it is available.

answered Jul 06 '16 at 14:20

Sener

394
2
12

4

Mine was locked down by Cura - a program that will (among other things) control 3D printers via serial. Closing it fixed the problem – Chris Jun 12 '19 at 12:16
1

@Chris thanks a lot, same problem – Heetola Dec 15 '19 at 13:27
Yes - be careful Cura seems to do this. – Kenn Jan 28 '20 at 17:49
same thing here with Cura, that is way wrong I don't even have a 3d printer plugged in so .. I'm going into Slic3r then – pjnovas Feb 27 '21 at 22:14
In my case, I simply forgot to close "Serial Monitor" window for another Arduino sketch, and that was it. – Kouichi C. Nakamura Jun 10 '21 at 13:55

score 1 · Answer 2 · answered Mar 06 '19 at 17:30

1

I'm using a windows 10 and had this happen randomly. I closed several other applications and it started working again.

answered Mar 06 '19 at 17:30

cagney

111
1

How did you find out what other applications are using this port? – György Balássy Oct 16 '20 at 03:52
I guessed. I was using my USB drive for some other things and just started closing stuff. – cagney Oct 24 '20 at 06:15
Worked for me by just closing File Explorer and Cura not sure which one was the problem. – The Thrifty Engineer Jan 07 '22 at 17:00

score 0 · Answer 3 · answered Jan 03 '16 at 12:17

You have selected the wrong COM port. Go to Tools -> Port -> Select the right port. If you do not know the port number disconnect the Arduino, open the same menu again and look what is listed there, write down if you can't remember, now plug your Arduino back in and select the option that wasn't there before.

Access denied when Uploading

3 Answers3

Linked

Related