1

Im trying to do OTA upload from Arduino IDE.

Uploaded BasicOTA to ESP-01 with flash size set to (FS:2mb, OTA 1019kb). ESP-01 connects and shows up in Port selection, but when trying to upload I get

Uploading.................................................

14:40:35 [ERROR]: Error Uploading

Thats the only output I get. Anyone had similar issue?

Thx

NccWarp9
  • 229
  • 1
  • 7

1 Answers1

3

The ESP-01 comes in two variants: blue, with 512KiB flash, and black, with 1MiB flash.

You have chosen an arrangement that needs 4MiB flash. It won't fit.

Choose a suitable flash size for your board.

Majenko
  • 103,876
  • 5
  • 75
  • 133
  • Im using Blue variant. Read the chip info using espressifs flash tool and it read 4MBit. In my haste I read 4MB not Mbit :) I have a black variant, will try with it – NccWarp9 Jun 09 '21 at 13:20