1

Physics has never been my strong point... I have a task to size a motor. The question is: Based on information below, how do I calculate required motor torque to accelerate a mass with the information below? Please explain the formulas and where they originate from. I understand how to calculate the force required. I don't understand how I compute the required torque to achieve this force.

Variables:

Motion Direction:  Horizontal - Perpendicular to gravity
Mechanics:  Ballscrew & Linear Slide mechanism.

(W) Weight of Load to move:           100KG
(D) Distance load should move:        1 m
(A) Speed load should move:          .04 m/s
(C) Coef of Friction of Mechanism:    .003
(p) all Screw Pitch:                 2.75 mm
(d) Ball Screw Dia:                   20mm
(T) Min motor torque required:         ?

*Please arbitrarily choose variables for any missing information and declare them in your post.

Thank you for your time.

ExcelMania
  • 11
  • 1
  • Check https://engineering.stackexchange.com/questions/31501/how-can-i-calculate-the-power-and-torque-required-for-the-motor-on-a-wheeled-rob – akauppi Oct 16 '19 at 20:20

1 Answers1

1

assuming constant acceleration, a, we need to cover 1 meter with an average speed of $$04m/s =\frac{0 +V_{final}}{2} \\ V_{final}= 0.8m/s $$ Force, F, needed for this acceleration is:

$V_{final}= \sqrt{2a*x}: 0.8 = \sqrt{2a*1}\\ a=0.8^2/2= 0.32 m/s^2 $

$$ F = ma =100*0.32m/s^2 =32kgm/s^2 \\ and\ 32* 1.003 = 32.09kgm/s^2$$ This is force demand increased by friction coefficient.

and the torque is $$\tau = 32.09kgm/s^2/(mechanical\ advantage\ of\ screw)=\frac{32.19}{(\pi*0.02 )/0.00275)}\\= 1.4kgm*m = 1.4* 9.8 =13.76Nm$$

We have assumed $sin( small\ angle\ \alpha)=\alpha$ on the screw pitch.

kamran
  • 21,714
  • 2
  • 18
  • 38
  • Hi Thanks for reply. When I try and convert to SAE units, I do not get correct results and the reason I belive is in the acceleration calculation. The value becomes drastic. This is not correct. .... Example::: wt(lbs) = 45...... Distance (in) = 39.37...... Desired Velocity (in/min) = 1183 ........ Friction = .003...... Pitch (in) = .109....... Dia (in) = .789...... ----- VFinal = 1183*2 = 2366 in/min....... a = VFinal^2/2 = 2798978 in/min...... F = 126331872 in/lbs...... Mech Adv = 22.844..... T = 12801xxxxxxx in-lbs..... What am I missing? Thanks very much, – ExcelMania Jan 17 '19 at 01:52
  • @ExcelMania, I will check it later, you check for the difference between lbs weight and lbs force, if I remember correctly you need to divide by 32.2. – kamran Jan 17 '19 at 04:52
  • Hi kamran. Thanks for your help... 1 lbf = 1lb weight. So I am confused. – ExcelMania Jan 18 '19 at 01:17
  • Go metric, man. Go metric. It's all much simpler and it's international as is this site. – Transistor Oct 13 '19 at 10:16