Engineering Stack Exchange
Engineering Stack Exchange

Questions tagged [vacuum-pumps]

38 questions
12
votes
1 answer

Replace mercury with silicone oil in diffusion pump

We have obtained an old mercury-vapor diffusion pump for high vacuum. However, we do not want to operate it with mercury in our lab due to health concerns (which is presumably the reason it was scrapped by the original owner). Instead, we plan to…
dominecf
  • 273
  • 1
  • 5
4
votes
2 answers

Arduino CNC - which vacuum pump?

I have an arduino powered CNC machine with the Protoneer v3.00 shield. I have a probe setup for auto levelling which works correctly, I get a depth map for the board. But the issue is that this depth map is created to the point at which the bit…
James Elder
  • 141
  • 1
2
votes
3 answers

Is there a good way to passively dry air in the input of a vacuum pump?

I'm using an a/c compressor as a vacuum pump for small projects that don't need a good vacuum pump, and I'm looking for a way to dry the air in the input, to prevent water from mixing with the oil inside. One way would be using a Peltier cooler and…
user2934303
  • 121
  • 1
2
votes
1 answer

How can I make a vacuum pump to move rocks from one place to another?

I am trying to build a vacuum pump by myself and move rocks from one place to another. After some online search, I came across this video on Youtube. I am trying to build something like this. Can anyone explain the science behind it and tell me how…
Joy Karmoker
  • 21
  • 2
2
votes
0 answers

How problematic is it to run vapor saturated liquid through a scroll pump?

I see that scroll pumps often have "Vapor ratings" of something like N Liters of water per hour. I know in rotary-vane pumps, it's a big no-no to run any kind of vapour through them and you need a cold trap. On the other hand, I know you can run…
Sargun Dhillon
  • 145
  • 4
2
votes
1 answer

What is the formula to work out time to remove water from an open vessel with vacuum?

We have an open container sitting at 1000mm off the ground and a receiver tank sitting one metre above it. Container holds 400l of water and is connected to the receiver by 80mm id pipe. I was planning on using extraction fans sitting in the open…
joe blogs
  • 23
  • 4
2
votes
0 answers

Generating a plasma via induction coil

I am trying to see if I can generate a plasma from an induction coil that is wrapped around a glass jar under vacuum. Tons of induction coil heatering circuits are on ebay for forging that can supply up to 1000W and operate at a frequency of 100khz.…
Matt
  • 31
  • 4
2
votes
3 answers

Transfer pump suitable for air, water and their mixture

I need a pump that can remove water from certain volume (~300ml). Water mixed with washing agent (soap) is pumped into this volume using another pump ~5-20L/minute. This volume is not completely sealed - air can get inside (sometimes easily,…
wonder.mice
  • 123
  • 5
2
votes
2 answers

How to regulate a vacuum pump?

I need a vacuum pump to provide at least 21" Hg of vacuum. Looking at the cheap rotary pumps on ebay, this one seems to be way more than fit for the job. Is there a way though I can regulate it though to provide lets say around 15-20" Hg? This isn't…
Transistor
  • 21
  • 1
  • 2
1
vote
1 answer

Can I use a standard HVAC rotary vane vacuum pump to draw a vacuum on a sealed chamber?

Background I have a beginner question concerning rotary vane vacuum pumps like this one: VIVOHOME 110V 1/3 HP 4CFM Single Stage Rotary Vane Air Vacuum Pump Here are the pump specifications: Voltage: 110V Free Air Displacement: 4CFM Ultimate Vacuum:…
nwsteg
  • 167
  • 6
1
vote
3 answers

How do vacuum sealers work on a glass jar?

I came across this video and I don't understand how a vacuum sealer works on a sealed glass jar. In the video, you can see the glass jars are closed tightly with a lid. In this case, how does the air inside the jar get sucked out to create a…
Mac_79
  • 111
  • 2
1
vote
0 answers

Extrapolating compressor curves for varying pump speeds

I'm currently working on modeling a vacuum system in which a pump is present. the pump is driven at a varying speed $\omega$. The manufacturer has only given the characteristic curve at a single speed $\omega_{ref}$, which is well-approximated by a…
dirkvwijk
  • 11
  • 1
1
vote
4 answers

Balancing suction air flow at different areas on pipe

I have a T-shaped pipe that is connected to a vacuum pump. Along one side, there are 4 areas of 9 holes where air will get sucked in from the surroundings. It's used to pick up some small objects. The problem is the 2 areas of holes that are closer…
Nick LeeJy
  • 13
  • 3
1
vote
1 answer

What kind of solenoid valve should I use for vacuum?

I'm currently working on a project in which I have to control 2 solenoid valves with arduino to switch the suction of a vacuum pump from one tube to another one (tried to explain it on the photo), I've tried one of those pneumatic 3/2 valves but it…
benjarojas
  • 13
  • 2
1
vote
1 answer

Vacuum Pump Specs

I have an airtight rigid chamber of volume V (~500 cu.ft.) I want to remove the air from the chamber such that the internal pressure is equivalent to some P absolute atmospheric pressure (eg 3.46psia) I would want to evacuate the chamber from…
Veldaeven
  • 113
  • 4
1
2 3