Questions tagged [magnets]

A magnet (from Greek μαγνήτις λίθος magnḗtis líthos, "Magnesian stone") is a material or object that produces a magnetic field. This magnetic field is invisible but is responsible for the most notable property of a magnet: a force that pulls on other ferromagnetic materials, such as iron, and attracts or repels other magnets.

A permanent magnet is an object made from a material that is magnetized and creates its own persistent magnetic field. An everyday example is a refrigerator magnet used to hold notes on a refrigerator door. Materials that can be magnetized, which are also the ones that are strongly attracted to a magnet, are called ferromagnetic (or ferrimagnetic). These include iron, nickel, cobalt, some alloys of rare earth metals, and some naturally occurring minerals such as lodestone. Although ferromagnetic (and ferrimagnetic) materials are the only ones attracted to a magnet strongly enough to be commonly considered magnetic, all other substances respond weakly to a magnetic field, by one of several other types of magnetism.

Ferromagnetic materials can be divided into magnetically "soft" materials like annealed iron, which can be magnetized but do not tend to stay magnetized, and magnetically "hard" materials, which do. Permanent magnets are made from "hard" ferromagnetic materials such as alnico and ferrite that are subjected to special processing in a powerful magnetic field during manufacture, to align their internal microcrystalline structure, making them very hard[citation needed] to demagnetize. To demagnetize a saturated magnet, a certain magnetic field must be applied, and this threshold depends on coercivity of the respective material. "Hard" materials have high coercivity, whereas "soft" materials have low coercivity.

67 questions
19
votes
1 answer

Can we change steel properties by application of magnetic field while quenching?

Austenite is non magnetic while $\alpha$-ferrite and pearlite are magnetic. (Magnetic properties of pearlite vary as a function of carbon content) If a strong magnetic field is applied in a particular direction while the steel is being quenched…
Subodh
  • 1,423
  • 9
  • 19
12
votes
3 answers

Can a magnetic lock be negated or overcome by a stronger electromagnet?

Magnetic locks seem to be fairly common on the doors of modern buildings, but I question their reliability when compared to a traditional, mechanical lock. I realize that the strength that it would take to actually pry a door away from a good…
9
votes
2 answers

What causes friction in magnetic bearings?

Magnetic bearings work by levitating a rotating shaft so that it is not in contact with its supports. This greatly reduces the friction of the system. In all of the literature that I have seen on magnetic bearings, the bearings are described as "low…
hazzey
  • 10,682
  • 9
  • 42
  • 93
8
votes
1 answer

Best way to send a signal in a very low frequency (250Hz)?

I am a programmer facing an electronic question, so I thought here is the place to ask! I have a magnetic field sensor which provides me with magnetic field values (XYZ axis) 250 times a second. An electronic circuit with a programmable…
rubmz
  • 183
  • 3
7
votes
2 answers

Under what circumstances would one need or not need an electronic brake for a permanent magnet motor?

My company was asked to design a custom product several years ago. The original requester never bought it, but we've sold several a year through distribution. It's been a small side-line for a while, but we'd like to understand the broader use and…
Stephen Collings
  • 1,695
  • 17
  • 27
5
votes
1 answer

Calculating Anisotropic Thermal Conductivity for two Materials

I've been working with SC magnet quench simulations. The conductor is made from NbTi in a Cu channel with a 5:1 ratio of Cu:NbTi. Opera3d has a quench program with an example that I began working from. In a quench scenario using a solenoid made from…
Chris
  • 153
  • 5
5
votes
1 answer

What grade of Neodymium magnets are commonly used in hard drives?

I want to buy some magnets, but the ones that I have found on online shops are mostly grade N38. They are pretty cheap, but they need to be as strong as the ones found in a hard drives. I am afraid hard drive magnets are N52 (or at least a higher…
77120
  • 151
  • 1
  • 5
4
votes
1 answer

3D Representation of Magnetic Field Lines

There are several tools available for monitoring electrical metrics (voltage, current, resistance, frequency). I have recently acquired all that I need for these studies. What tools are available for monitoring magnetic metrics (force, flux,…
4
votes
1 answer

How to 'smooth/flatten' the surface of a disturbed liquid without contacting it?

I would like to essentially flatten or smooth the surface of a viscous liquid after dropping an object into it, without actually touching the liquid. For example, if I drop a rock into a tub of oil, I need the oil to move into the void and return to…
user88720
  • 265
  • 1
  • 10
4
votes
1 answer

Can a Foucault's current brake be used on the rails themselves to brake trains?

Your typical Foucault's current brakes operate on a disk, which is placed in an electromagnetic field in order to transform kinetic energy into heat without friction. The problem is that the disk still overheats, just like an usual disk brake. In…
Bregalad
  • 330
  • 3
  • 14
4
votes
1 answer

Magnetic decoupling torque

I have a system consisting of 4 magnets rotating at speeds between 200 and 6,000rpm, which are facing 4 other magnets with a 0.5mm gap between the two sets. The set-up looks like this: Both sets of magnets have their noth pole facing out so that…
am304
  • 1,816
  • 12
  • 22
4
votes
1 answer

Magnetic levitation

I am currently considering turning my fascination with magnets into a diy activity. How feasible is it for a hobbyist to construct a working model of a maglev device? I'm looking to build something really small for now,just a demonstrative…
3
votes
1 answer

How does a Levitron work?

I just watched this video: https://www.facebook.com/HigherPerspective/videos/1162007547164896/ I don't understand what I see. If the spinner's magnetic, the bowl is made of iron and that the wood piece is magnetic too. Shouldn't the iron bowl mess…
3
votes
1 answer

How is the attractive force between two magnets changed when they are separated by non-metalic solids?

I recently encountered the following practical problem. We have a system of several layers: a neodymium magnet; a disc, dimensions and grade to be determined 1 mm of 925 sterling silver; we can suppose that this is a disc, diameter 15 mm 0.5 mm of…
TZakrevskiy
  • 131
  • 2
3
votes
1 answer

Do magnetic fields applied to a fuel line have an effect on heat output?

I am doing my final year engineering project on Magnetic Field Assisted Combustion and was curious to see what people thought about it. Companies sell rare earth magnetic arrangements to be attached to fuel lines of gas burners and they are said to…
1
2 3 4 5