Questions tagged [soldering]

I have a job where I need to solder a brass tube at a precision 90 degree perpendicular angle to a piece of round stock. My current idea was to use a spring loaded center to hold the tube upright at a precision angle for solder application in my…

How can we solder two stainless steel rods material- Stainless steel 304 or SS316 OD-6mm ID-1.6mm Depth-4mm Or there is any other better option to join these two parts?

I'm a real thrifty guy, so seeing my soldering tip with months of use on them starting to crack & peel, the layer I take to be nickel cladding, disheartens me. Again, this is planned obsolescence to take advantage of the different heating/cooling…

I am in the process of machining and assembling a smokebox for a model train. The smokebox in question is approximately 35mmx35mmx22mm. There are a series of handrail knobs and rails that are to be mounted on the smokebox. The stems of the hand rail…